;..................
;:                :
;: Remote VHF/UHF :
;:................:
;
;-File Update 16 Dec 1998. WARNING - ADJUST FOR 10M.
;
;This file will program the controller so that the
;VHF and UHF remotes can be used.
;The Band will come up in receive only mode and this
;can be switched to tranceive mode if wanted. This will
;prevent annoying DTMF tones on a working channel.
;The VHF/UHF remotes are connected via the Doug Hall
;RBI interface on port 7. Two radios are connected.
;2M radio is a Kenwood TM-421A.
;70cm radio is a Kenwood TM-441A.
;23cm radio is not currently connected.
;These macro's will switch the remote base on and connect it to
;port 1. If the 10M link is on and connected, which is connected
;to port 1, the remote will switch the 10M off, and disconnect the ports.
;When the remote is switched off, it will switch the 10M back on
;and connect port 1, if connected before the remote was activated.
;The switching of the 10M port by the remote commands is
;determinded by the 10M on/off macro, which adds commands to the
;VHF/UHF remote macro's 702 and 704, in positions 01 and 05.
;
;Macro 700, UHF Remote, default freq. 435.000MHz.
;
n053 700 038 ;Mask responces.
n056 700 142 4350002 ;Switch UHF remote on, 435.000 Simplex.
n056 700 010 700 ;Change Macro 700 to none.
n056 700 010 701 4a1401 ;Change Macro 701 to "4A1401".
n056 700 010 705 4A4301 ;Change Macro 705 to "4A4301".
n056 700 702 ;Call Macro 702. 
n056 700 065 ;Unmask responces. 
n056 700 036 408 292 359 404 ;Say 'Remote Link Open, Receive'.
n056 700 149 ;Readback Frequency. 
n010 700 4a4301 ;Change Macro 700 to "4A4301".
;
;Macro 701, VHF Remote, default freq. 145.000MHz. 
;
n053 701 038 ;Mask responces. 
n056 701 142 1450002 ;Switch VHF remote on, 145.000 Simplex.
n056 701 010 701 ;Change Macro 701 to none.
n056 701 010 700 4a4301 ;Change Macro 700 to "4A4301".
n056 701 010 705 4A1401 ;Change Macro 705 to "4A1401".
n056 701 702 ;Call Macro 702. 
n056 701 065 ;Unmask responces. 
n056 701 036 408 292 359 404 ;Say 'Remote Link Open, Receive'.
n056 701 149 ;Readback Frequency. 
n010 701 4a1401 ;Change Macro 701 to "4A1401".
;
;Macro 702, Added commands for Macro's 700 and 701.
;
n053 702 000 17 ;Connect port 1 to port 7.
n056 702 010 703 4A000 ;Change Macro 703 to "4A000".
n056 702 010 702 ;Change Macro 702 to none.
n056 702 155 7 0 ;Switch PTT for port 7 Off.
n056 702 010 142 4A ;Change Macro 142(Set Freq.) to 4A.
n056 702 053 705 036 292 359 ;Delete Macro 705, program with 'Link Open'.
;
;Macro 703, Turn VHF/UHF Remotes Off.
;
n053 703 038 ;Mask responces.
n056 703 002 17 ;Disconnect port 1 from port 7.(Link)
n056 703 151 0 ;Turn Remotes Power Off.
n056 703 010 700 4A4301 ;Change Macro 700 to "4A4301".
n056 703 010 701 4A1401 ;Change Macro 701 to "4A1401".
n056 703 010 703 ;Change Macro 703 to none.
n056 703 704 ;Call Macro 704.
n056 703 065 ;Unmask responces.
n056 703 036 587 408 292 171 587 ;Say 'Remote Link Closed'.
;
;Macro 704,
;
n053 704 010 705 4A000 ;Change Macro 705 to "4A000".
n056 704 053 705 036 292 171 ;Delete Macro 705, program with 'Link Closed'. 
n056 704 010 142 ;Change Macro 142 to "".(Set Freq.)
;
;Macro 705,
;
n055 705 ;Delete contents of Macro 705.
;
;Macro 706, PTT On for Port 7.
;
n053 706 038 ;Mask reponces.
n056 706 155 7 1 ;Switch port 7 PTT On.
n056 706 065 ;Unmask responces.
n056 706 036 497 359 ;Say 'Transmit Active'.
n010 706 1501 ;Change Macro 706 to "1501".
;
;Macro 707, PTT Off for Port 7.
;
n053 707 038 ;Mask responces.
n056 707 155 7 0 ;Swicth port 7 PTT Off.
n056 707 065 ;Unmask responces.
n056 707 036 497 130 ;Say 'Transmit Inactive'.
n010 707 1500 ;Change Macro 707 to "1500".
;
n190 700 703 1 ;Access Level 1, all users.
;
;.....................
;:                   :
;:     10 Meter      :
;:     Repeater      :
;:...................:
;
;The 10 Meter Repeater will be set to run on Port 3.
;
;Macro 710, 10 Meter On.
;
n053 710 038 ;Mask responces.
n056 710 000 13 ;Connect port 1 to port 3.(10 Meter)
n056 710 711 ;Call Macro 711.
n056 710 010 710 ;Change Macro 710 to none.
n056 710 010 712 10C0 ;Change Macro 712 to "10C0".
n056 710 010 714 10C1 ;Change Macro 714 to "10C1".
n056 710 053 714 036 358 ;Program Macro 714 to say 'ON'.
n056 710 065 ;Unmask responces.
n056 710 036 010 358 ;Say '10 Open'.
n010 710 10c1 ;Change Macro 710 to "10C1".
;
;Macro 711,
;
n053 711 059 702 01 002 13 ;Program Macro 702 with Disconnect port 1 from port 3. 10m Audio Routing Off
n056 711 059 703 05 000 13 ;Program Macro 703 with Connect port 1 to port 3. 10m Audio Routing On
n056 711 159 000 1 ;Turn Event Macro 000 On, Disconnect Audio from 10m Port when 70cm Port active
n056 711 159 008 1 ;Turn Event Macro 008 On, Enable Audio from 10m Port when 70cm Port Inactive.
;
;Macro 712, 10 Meter Off.
;
n053 712 038 ;Mask responces.
n056 712 002 13 ;Disconnect port 1 from port 3.(10 Meter)
n056 712 010 712 ;Change Macro 712 to none.
n056 712 010 710 10C1 ;Change Macro 710 to "10C1".
n056 712 010 714 10C0 ;Change Macro 714 to "10C0".
n056 712 053 714 036 354 ;Program Macro 714 to say 'Off'.
n056 712 065 ;Unmask responces.
n056 712 036 010 354 ;Say '10 Closed'.
;
;Macro 713, 
;
n056 712 058 702 01 ;Delete command line 01 from Macro 702.
n056 712 058 703 05 ;Delete command line 05 from Macro 703.
n056 712 159 000 0 ;Turn Event Macro 000 Off.
n056 712 159 008 0 ;Turn Event Macro 008 Off. 
;
;Macro 714,
;
n055 714 ; Delete contents of Macro 714, HF condition Responce.
;Programming Finished.