!
;..........................
;: Port 2 Configuration   :
;:  Programme Messages,   :
;:   Macros and Timers    :
;:........................:
;
;File Updated 16 Dec 1998.
;
;This file will set-up Port 2.
;Port 2 is a Repeater, Freq. is 147.325MHz.
;
;Turn audio responce off to Ports.
n050 09 0 ;Hide Voice Responces from now on.
;
;Port Configuration.
n000 2 2 ;Turn port into Repeater.
n005 2 1 ;Port access mode - COR only.
n155 2 1 ;Enable PTT for Port 2.
;
;Macros.
;Macro 221, Inital ID. Welcome to the Z L 1 H K, 2m Repeater, the time is <time>.
n053 221 064 260 526 487 476 541 042 001 038 041 587 002 314 411 587 476 484 270 810
;
;Macro 229, Pending ID #1. Z L 1 H K Repeater
n053 229 064 260 541 042 001 038 041 587 411 587 ;
;
;Macro 237, Pending ID #2.
n053 237 176 ;DVR message "Who has Mail"
;
;Macro 245, Pending ID #3. Z L 1 H K / R. in CW.
n053 245 030 41 35 21 01 17 20 36 27 41 ;
;
;Macro 253, Pending ID #4.
n055 253 ;Delete contents of Macro 253.
;n053 253 173 200 ;Play DVR slot 200.
;
;Macro 261, Impolite ID. Z L 1 H K / R. in CW.
n053 261 030 41 35 21 01 17 20 36 27 41 ;
;
;Macro 357, Time Out Timer.
n053 357 036 587 520 587 657 058 002 484 364 587 ;Say "Repeater about to time-out"
;
;Macro 365, Time Out Timer Clear.
n053 365 036 587 657 484 364 127 587 ;Say "Repeater Time-Out Clear".
;
;Pending ID's.
n085 2 1 ;Turn On Id's.
n087 2 1 ;Set Pending ID's to Random.
;
;DTMF Requirements
n168 2 0 ;Allow DTMF with COR or PL
n007 2 000 ;DTMF mute on, cover tone on, bypass off.
;
;Timers
;n020 001 500 ;Message Start Delay. Default 500ms.
;n020 009 100 ;Courtesy Beep Delay. Default 100ms.
n020 017 500 ;Transmitter Hang. Default 200ms.
;n020 025 100 ;DTMF Mute. Default 100ms.
;n020 050 100 ;Courtesy Beep after Voice. Default 100ms.
;n020 061 050 ;Mini Hang Timer. Default 500ms.
n020 069 020 ;Key-up Delay Timer.
;n020 101 020 ;Impolite ID. Default 20sec.
n020 109 1800 ;Inital ID. Default 600sec (10min).
n020 117 1740 ;Pending ID. Default 540sec (9min).
n020 125 300 ;Time Out Timer. Default 180sec (3min).
;n020 133 008 ;Dial Tone. Default 8sec.
;n020 141 008 ;Preaccess. Default 8sec.
;n020 165 005 ;DTMF Interdigit. Default 5sec.
;n020 177 060 ;Log-on Timer. Default 60sec.
;n020 187 300 ;Tail Message Timer.
;n020 195 ??? ;Re-enable Key-up Timer.
;
;Macro 269, Courtesy Tone. Bumble Bee Tone Sequence.
;
n053 269 040 010 000 0330 ;Send 330 Hz Tone @ 100ms, Delay 0ms.
n056 269 040 010 000 0500 ;Send 500 Hz Tone @ 100ms, Delay 0ms.
n056 269 040 010 000 0660 ;Send 660 Hz Tone @ 100ms, Delay 0ms.
;
;n041 2 1 ;Courtesy Tone enable.
;
;n042 2 20  ;CW speed 20wpm
;
n043 2 0800 ;CW Tone 800Hz.
;
;End Programming.