!
;..........................
;: Port 1 Configuration   :
;:  Programme Messages,   :
;:   Macros and Timers    :
;:........................:
;
;4 Jan 1999.
;Updated file to include the new commands and timers with ver. 1.80.
;
;16 Dec 1998.
;Tidied up file so to read better, and gave an account of updates.
; 
;This file will set-up Port 1.
;Port 1 is a Repeater, Freq. is 438.250MHz.
;
;Turn audio responce off to Ports.
n050 09 0 ;Turn Serial Voice responce off.
;
;Port Configuration.
n000 1 1 ;Turn port into Repeater.
n005 1 1 ;Port access mode - COR only.
n155 1 1 ;Enable PTT for Port 1.
;
;Macros
;Macro 220, Inital ID. Welcome to the Z L 1 H K, 70cm Repeater, the time is <time>.
n053 220 064 260 526 487 476 541 042 001 038 041 587 025 122 314 411 587 476 484 270 810
;
;Macro 228, Pending ID #1. Z L 1 H K Repeater
n053 228 064 260 541 042 001 038 041 587 411 587 !
;
;Macro 236, Pending ID #2.
n053 236 176 ;DVR message "Who has Mail"
;
;Macro 244, Pending ID #3. Z L 1 H K / R. in CW.
n053 244 030 41 35 21 01 17 20 36 27 41
;
;Macro 252, Pending ID #4.
n055 252 ;Delete Macro.
;
;Macro 260, Impolite ID. Z L 1 H K / R. in CW.
n053 260 030 41 35 21 01 17 20 36 27 41
;
;Macro 356, Time Out Timer.
n053 356 036 587 520 587 657 058 002 484 364 587 ;Say "Repeater about to time-out"
;
;Macro 364, Time Out Timer Clear.
n053 357 036 587 657 484 364 127 587 ;Say "Repeater Time-Out Clear".
;
;Pending ID's.
n085 1 1 ;Turn On Id's.
n087 1 1 ;Set Pending ID's to Random.
;
;DTMF Requirements
n168 1 0 ;Allow DTMF with COR or PL
n007 1 110 ;DTMF mute on, cover tone on, bypass off.
;
;Timers
;n020 000 500 ;Message Start Delay. Default 500ms.
;n020 008 100 ;Courtesy Beep Delay. Default 100ms.
n020 016 500 ;Transmitter Hang.Set 500ms,Default 200ms.
;n020 024 100 ;DTMF Mute. Default 100ms.
;n020 049 100 ;Courtesy Beepafter Voice. Default 100ms.
;n020 060 050 ;Mini Hang Timer. Default 500ms.
n020 068 020 ;Key-up Delay Timer.
;n020 100 020 ;Impolite ID. Default 20sec.
n020 108 1800 ;Inital ID.Set 1800sec(30min),Default 600sec (10min).
n020 116 1740 ;Pending ID.Set 1720sec(29min),Default 540sec (9min).
n020 124 300 ;Time Out Timer.Set 300sec(5min),Default 180sec (3min).
;n020 132 008 ;Dial Tone. Default 8sec.
;n020 140 008 ;Preaccess. Default 8sec.
;n020 164 005 ;DTMF Interdigit. Default 5sec.
;n020 176 060 ;Log-on Timer. Default 60sec.
;n020 186 300 ;Tail Message Timer. Default 300sec.
;n020 194 ??? ;Re-enable Key-up Delay Timer.
;
;Courtesy Tone.
;Macro 268, Courtesy Tone. Do Not Change.
;n055 268 ;Delete Macro.
;n053 268 040 020 001 0500 ;200ms, 500Hz.
;
;n041 1 1 ;Courtesy Tone enable.
;
;n042 1 20  ;CW speed 20wpm
;
n043 1 0800 ;CW Tone 800Hz.
;
;End Programming.