;......................
;:                    :
;:   Phone Patch      :
;:....................:
;
;-File Updated 29 Oct 1999.
;Adjusted so Port 8 is now the Auto-Patch.
;-File Updated 19 April 1999.
;Change TOT back to 180sec, 3 min's.
;-File Updated 26 Feb 1999.
;Added Error and Responce Macro's changes.
;-File Updated 17 Feb 1999.
;Update Time-out for port 5 to 120secs, 2 mins.
;-File Update 20 Jan 1999.
;Update program so auto-patch is using port 5 until ports 3 and 4
;fitted with their cards.
;
;This file will setup Port 8 to run the Auto-Patch.
;The Auto-Patch is a remote site Patch, permitting operation
;from a residental home location.
;The Link is via a UHF radio link with CTCSS control.
;It is important to note that Northland also has the "09" Prefex
;and will need to be blocked, this includes Warkworth etc.
;
! ;Get DTMF Prompt.
;
;Main Auto-Patch Setup.
;
n110 8 0 ;Set-up Port 8 for Auto-Patch, with no Read-back.
n005 8 11 ;Set Radio access for COR.
n133 0 ;Disable reverse Patch.
n020 131 180 ;Set Time-out timer for hang-up to 3min, 180secs.
n010 112 * ;Rename Macro 112, Normal Forward to "*".
n010 114 1# ;Rename Macro 114, Hang-up to "1#".
n010 115 # ;Rename Macro 115, Normal Hang-up to "#".
n010 129 1** ;Rename Redial Access to "1**".
;
;
;Change AutoPatch Error and Responce Macro's.
;
;Macro 212, Bad Auto-Patch Number, Number not Permitted.
n053 212 063 587 348 118 ;Number Cancel.
;Macro 213, Auto-Patch Error, Number too Short or too Long.
n053 213 063 587 348 185 ;Number Error.
;Macro 401, Auto-Patch Connect.
n053 401 173 004 ;Your call is being Processed, Please Stand by.
;Macro 404, Auto-Patch Complete.
n053 404 173 002 ;Your call is now Complete.
;Macro 411, Auto-Dial Connect.
n053 411 173 004 ;Your call is being Process, Please Stand by.
;
;Macro 512, Call Length Reset.
;
n053 512 030 24 20 ;Send CW letter "OK" as a Response.
n056 512 038 ;Mask responses.
n056 512 022 131 ;Reset Auto-Patch Timer. (131 = Time out Timer for Port 8).
n010 512 1*# ;Rename macro 512 to "1*#".
n190 512 0 ;Set Access to Level 0.
;
n116 100 100 1 ;Set Pre-dial to 1 sec, 1 sec, dial 1.
;
;Allowed Table.
;
n119 000 23# ;Allow calls to Pukekohe. Local Calls
;The following are to a Auckland unlimited access line.
n119 001 093## ;Allow calls to Auckland starting with "3".
n119 002 094## 'Allow calls to Auckland starting with "4".
n119 003 095## ;Allow calls to Auckland starting with "5".
n119 004 096## ;Allow calls to Auckland starting with "6".
n119 005 098## ;Allow calls to Auckland starting with "8".
n119 006 0925# ;Allow calls to Auckland starting with "25".
n119 007 0926# ;Allow calls to Auckland starting with "26".
n119 008 0927# ;Allow calls to Auckland starting with "27".
n119 009 0929# ;Allow calls to Auckland starting with "29".
;
;Nuisance Table.
;
n121 000 ### ;Block all 3 digit numbers.
n121 001 #### ;Block all 4 digit numbers.
n121 002 ##### ;Block all 5 digit numbers.
n121 003 ###### ;Block all 6 digit numbers.
n121 004 ######## ;Block all 8 digit numbers.
;n121 005 ######### ;Block all 9 digit numbers. This prevent any toll calls being made.
n121 006 ########## ;Block all 10 digit numbers.
n121 007 ########### ;Block all 11 digit numbers.
n121 008 0940##### ;Block all calls starting with "40", Northland.
n121 009 0942##### ;Block all calls starting with "42", Helensville/Hibiscus Coast/Warkworth/Gt Barrier Areas.
n121 010 0943##### ;Block all calls starting with "43", Warkworth Area.
n121 011 0945##### ;Block all calls starting with "45".
n121 012 0946##### ;Block all calls starting with "46".
n121 013 0949##### ;Block all calls starting with "49".
;
;0900 number are not premitted, as these are charged to the account.
n121 020 090#### ;Block all calls starting with "0900 + 3 digits". Total 7 digits.
n121 021 090###### ;Block all calls starting with "0900 + 5 digits". Total 9 digits.
;
;0800, 087, 0508, 0509 numbers are toll free, but not allowed through SARG Auto-Patch.
n121 030 08##### ;Block all calls starting with "0800 + 3 digits, 087 + 4 digits". Total 7 digits.
n121 031 08####### ;Block all calls starting with "0800 + 5 digits, 087 + 6 digits". Total 9 digits.
n121 032 05####### ;Block all calls starting with "0509 + 5 digits". Total 9 digits.
;
;Auto-Dial Slots.
;
;The following Emergency Numbers are not freely accessible, but are able
;to be activated if needed by Control Operator.
;
n124 111 111 ;Program Auto-Dial slot 111 with emergency 111.
n126 111 1 1 ;Auto-Dial slot 111, pre-dial, send callsign, "Emergency 111".
n127 111 0 ;Disable Auto-Dial slot 111.
n124 911 111 ;Program Auto-Dial Slot 911 with emergency 111.
n126 911 1 1 ;Auto-Dial slot 911, pre-dial, send callsign, "Emergency 111".
n127 911 0 ;Disable Auto-Dial slot 911.
;
;Operator Speed Dialers.
;
n124 122 092986789 ;Program Auto-Dial slot 122.
n126 122 1 1 ;Auto-Dial slot 122, pre-dial, send callsign, "ZL1BUP"
n127 122 1 ;Enable Auto-Dial slot 122.
n124 177 092989297 ;Program Auto-Dial slot 177.
n126 177 1 0 ;Auto-Dial slot 177, pre-dial, do not send callsign, "ZL1AMN"
n127 177 1 ;Enable Auto-Dial slot 177.
n124 188 096267188 ;Program Auto-Dial slot 188.
n126 188 1 1 ;Auto-Dial slot 188, pre-dial, send callsign, "ZL1BFB".
n127 188 1 ;Enable Auto-Dial slot 188.
n124 438 096264830 ;Program Auto-Dial slot 438.
n126 438 1 0 ;Auto-Dial slot 438, pre-dial, do not send callsign, "ZL1ABP".
n127 438 1 ;Enable Auto-Dial slot 438.
n124 456 094789529 ;Program Auto-Dial slot 456.
n126 456 1 0 ;Auto-Dial slot 456, pre-dial, do not send callsign, "ZL1CCJ".
n127 456 1 ;Enable Auto-Dial slot 456.
n124 533 095338574 ;Program Auto-Dial slot 533.
n126 533 1 0 ;Auto-Dial slot 533, pre-dial, do not send callsign, "ZL1MA".
n127 533 1 ;Enable Auto-Dial slot 533.
n124 555 095755554 ;Program Auto-Dial slot 555.
n126 555 1 0 ;Auto-Dial slot 555, pre-dial, do not send callsign, "ZL1CY".
n127 555 1 ;Enable Auto-Dial slot 555.
n124 566 094191336 ;Program Auto-Dial slot 566.
n126 566 1 0 ;Auto-Dial slot 566, pre-dial, do not send callsign, "ZL1AD".
n127 566 1 ;Enable Auto-Dial slot 566.
n124 741 092663169 ;Program Auto-Dial slot 741.
n126 741 1 0 ;Auto-Dial slot 741, pre-dial, do not send callsign, "ZL1AWW".
n127 741 1 ;Enable Auto-Dial slot 741.
n124 802 092984802 ;Program Auto-Dial slot 802.
n126 802 1 0 ;Auto-Dial slot 802, pre-dial, do not send callsign, "Zl1TEY"
n127 802 1 ;Enable Auto-Dial slot 802.
n124 841 092984107 ;Program Auto-Dial slot 841.
n126 841 1 0 ;Auto-Dial slot 841, pre-dial, do not send callsign, "ZL1AOD"
n127 841 1 ;Enable Auto-Dial slot 841.
n124 961 092688226 ;Program Auto-Dial Slot 961.
n126 961 1 1 ;Auto-Dial slot 961, pre-dial, send callsign, "ZL1UDD".
n127 961 1 ;Enable Auto-Dial slot 961.
n124 962 89 ;Program Auto-Dial Slot 962 with Home, ext 89.
n126 962 0 1 ;Auto-Dial slot 962, no pre-dial, send callsign, "ZL1UDD".
n127 962 1 ;Enable Auto-Dial slot 962.
;
;Access Levels.
n190 110 111 7 ;Set Access to Level 7.
n190 112 0 ;Set Access to Level 0.
n190 113 7 ;Set Access to Level 7.
n190 114 115 0 ;Set Access to Level 0.
n190 116 128 7 ;Set Access to Level 7.
n190 129 0 ;Set Access to Level 0.
n190 132 136 7 ;Set Access to Level 7.
n190 137 0 ;Set Access to Level 0.
;
;End Programming.